Grundfos Six-Part Webinar Series
Pumps & Systems kicks off 2016 with a 6-part webinar series presented by Grundfos. In this series, you will learn how to choose the right pump, dosing basics, boiler feed system basics and more. Technical training experts will present each topic and be available to answer questions at the end of each hour-long webinar.
The first webinar in the series is “How to Read a Pump Curve.” The most fundamental of all centrifugal pump documents – the performance curve – is packed with information that can be used as an aid in selection and specification of the right equipment. This webinar will teach you to read the pump curve, to know what information is there, and understand how it is formatted. Additionally, you will learn how to interpret the graphically provided information and what it means. Finally, you will learn how to use the pump curve to make decisions on the choice of pump and driver sizing, power consumption strategies, and many others.
Participants will receive a certificate to submit for CEU credits!
To register for the next part of the series or to view recordings of previous webinars, click the links below.
Part 1: How to Read a Pump Curve — view a recording of this webinar today.
Part 2: Efficient Pump Selection and Control — register for an updated version of this webinar today.
Part 3: Introduction to Boiler Feed Systems — view a recording of this webinar today.
Part 4: Choose the Right Pump for the Application — view a recording of this webinar today.
Part 5: Dosing Basics — view a recording of this webinar today.
Part 6: Vertical Turbine Pumps – Wire-to-Water — view a recording of this webinar today.