Sealless Rotodynamic Pumps for Nomenclature, Definitions, Application, Operation and Test 2-Part Webinar Series - On Demand

This webinar explains how to use the ANSI/HI 5.1-5.6 standard for sealless rotodynamic pumps.

122 Minutes
$99
Pump Vibration Single-Session Webinar - On Demand

This webinar reviews the recently updated normative ANSI standard (including appendices) for vibration acceptance testing.

67 Minutes
$59
Rotodynamic Pumps for NPSH Margin Single-Session Webinar - On Demand

This webinar discusses the benefits to pump longevity when the NPSHA is greater than the NPSHR by a suitable margin and suggests margins for specific applications.

60 Minutes
$59
Hydraulic Modeling and Simulation of Pumping Systems 2-Part Webinar Series - On Demand

This webinar discusses the differences between component optimization and system optimization and demonstrates how analysis software can be used.

106 Minutes
$99
Condition Monitoring 2-Part Webinar Series - On Demand

This webinar covers proper monitoring practices and typical indicators to monitor in a pumping system.

197 Minutes
$134
Variable Frequency Drives 3-Part Webinar Series - On Demand

This webinar outlines the general concepts for using a variable frequency drive in pumping applications and covers their fundamental principles of operation.

169 Minutes
$134
Power Plant Pumps 3-Part Webinar Series - On Demand

This webinar provides an overview of the power generation industry and details the different power plant configurations.

203 Minutes
$134
Slurry Pumps 3-Part Webinar Series - On Demand

This webinar reviews the ANSI/HI standard 12.1–12.6 for slurry pumps and provides guidance on how to interpret and apply the guidelines and recommendations given in the standard.

181 Minutes
$134
Wastewater Treatment Plant Pumps 3-Part Webinar Series - On Demand

This course presents an overview of wastewater treatment plants (WWTPs) and the pumps used in wastewater applications.

155 Minutes
$134
Advanced Dynamics of Pumping Machinery 4-Part Webinar Series - On Demand 9.6.8

This webinar reviews the ANSI/HI 9.6.8 guideline, Rotodynamic Pumps: Guideline for Dynamics of Pumping Machinery and explains how the need for dynamic analysis for pumping machinery is determined.

293 Minutes
$149
Variable Speed Pumping 4-Part Webinar Series - On Demand

This webinar reviews the new variable speed pumping guidebook and how to use variable speed pumping for more efficient and better controlled pumping.

250 Minutes
$149
Water Treatment Plant Pumps 3-Part Webinar Session - On Demand

This webinar provides an explanation of water treatment plant operations and introduces the Pump Selection Guide Chart, which instructs the process for selecting pumps for water treatment plants.

179 mintues
$134
Effective Pump Intake Design and Troubleshooting Problem Intakes- 4-Part On-Demand Webinar Series

This webinar offers an overview of design objectives, required inlet bell design diameter, submergence requirements, using the Rotodynamic Pumps for Intake Design (ANSI/HI 9.8-2018) standard for proper instructions on intake structures for clear liquids and solids-handling pumps

60 minutes
$149
Overview of the U.S. DOE Energy Conservation Standard and Test Procedure for Clean Water Pumps On-Demand Webinar

This free on-demand webinar will bring you up to speed on the impact of the DOE Energy Conservation Standard & Test Procedure for pumps.

$Free
Assessing Pumping Systems for Optimization- 2 Part On-Demand Webinar Series

Learn the the requirements to conduct a pump system assessment.

120 minutes
$99