M&C Pump Americas

M&C Pump Americas is a Houston-based premier manufacturer of ANSI B73.1 Process Pumps, Self-Prime Trash Pumps, Slurry/Mud Pumps, and Gear Pumps. We also have a huge selection of pump parts such as casings, impellers, stuffing box covers, bearing frames, rotating assemblies, casing assemblies, seal plates, wear plates, mechanical seals, etc.

BEST QUALITY & VALUE

Mersino

We meet your groundwater control challenges using expert services. This includes deep well and wellpoint dewatering, eductor well services, and by groundwater exclusion through the use of our extensive fleet of one-pass trenchers to install cut-off walls and collection trenches.

Mersino designs and installs complete bypass pumping systems, whether it is a sewer bypass or a water supply system for fracking operations. We also maintain a well balanced fleet of generators to assist you with your power generation needs.

Global Pump

Global Pump's full line of electric or diesel driven pumps are available in a variety of sizes and configurations to meet your specific requirements. Our team can consult with you and design the most efficient solutions. With origins in contractor dewatering, we understand the value of reliable pumping equipment and moved to control our own destiny with the idea of developing a pump design and manufacturing company and making Global Pump® a reality in 1997.

Dura-Bar

Dura-Bar, a division of Charter Dura-Bar, is the leader in the production, technology and application of continuous cast iron bar stock. Dura-Bar has been made with the manufacturer in mind since 1961. Engineered to machine fast and consistently, it is not only the finest cast iron in the world, but an ideal alternative to many grades of steel, iron castings and aluminum.

EBARA Pumps Americas Corporation

About EBARA Pumps Americas Corporation

EBARA Pumps Americas Corporation (EPAC), the US sales and service subsidiary of EBARA Corporation, Japan, provides engineered pump, pump products and related services for the water, wastewater, commercial, municipal, energy and power industries offering reliable product knowledge, application expertise and responsive support including aftermarket replacement parts services.

Motion Industries, Inc.

Motion Industries offers more industrial parts, supplies, services and expert technical and application support than any industrial distributor in North America. Our 1,700 experienced account representatives and 200 field product specialists are always there to solve your toughest challenges.

Dekker Vacuum Technologies, Inc.

Dekker Vacuum Technologies manufactures, packages and distributes industrial vacuum pumps and systems for a wide-array of industries including Power Generation, Chemical Processing, Plastic Manufacturing, Food Processing, Pulp & Paper and more. The Dekker name has been recognized as an innovator in oil sealed liquid ring technology as far back as the 1970’s. Dekker Vacuum Technologies, established in 1998, has continued to build on that reputation to cover all aspects of vacuum and compressor applications.

Tri-Rotor Pump

Tri-Rotor has been manufacturing positive displacement rotary piston pumps for over 80 years. With five pump series, Tri-Rotor has a pump for every application. These include models with variable volume control heads, bypass heads and solid heads. Pumps are in stock for immediate shipment. Maximum recommended pump speeds range from 30 GPM, for foot mounted and close coupled units, up to 240 GPM. Our pumps excel in pumping both common materials and difficult-to-handle products, with a wide range of viscosities, in industrial applications.

United Rentals

United Rentals (NYSE:URI) was founded in 1997 and quickly became the world’s largest equipment rental provider. Today, our company continues to build on its industry leadership with a best-in-class range of resources and the largest customer service network of its kind in North America.
United Rentals deploys over $11.4 billion of fleet (original equipment cost) through approximately 1,000 branches, a centralized reservation service and automated online ordering. Our branches are fully integrated through technology, allowing them to collaborate on solving customer needs.

Hydra-Tech Pumps

Hydra-Tech Pumps a USA manufacturing company, located in the northeastern part of Pennsylvania has been designing and building pumping solutions since 1977, giving them over 40 years of experience and expertise. As a manufacturer of hydraulically driven submersible pumps and hydraulic power units, Hydra-Tech offers high quality, low lifetime cost products for a variety of pumping applications. Our systems are designed to cover the widest range of applications including construction, OEM, municipal, petro-chemical, mining, marine utilities and government customers.

Apex Heavy Duty Pumps

We are very proud to be the North American master distributor of APEX Heavy Duty Submersible Pumps, manufactured by Peak Mechanical and Components. This quality pump line can surmount even the most demanding challenges. APEX Heavy Duty pumps are manufactured with premium grade 356-T6 aluminum; 17-4 ph (hardened) stainless steel; and aircraft grade, proprietary polyurethane. In addition, all pumps have tungsten carbide mechanical seal faces. APEX strictly adheres to machining tolerances, heat-treating specifications, fabrication, and assembly processes.

Advanced Ceramics & Carbon

Advanced Ceramics & Carbon (ACC) was started by a group of experienced technical engineers who have been involved in the mechanical/industrial market for many years. Over time, we have come to know and appreciate what the market (our customers) expects and deserves as far as excellent customer service. At ACC, some of our capabilities include seal faces, bushings/bearings, steam joints, rotors and vanes, industrial brushes, graphite specialty parts, and more.