Over the past two months, payrolls in the U.S. have rebounded 7.5 million, as businesses reopened.
Pumps
Uncertainty must be considered, as is the case with all tests.
New threats must be considered when maintaining infrastructure.
There is an optimal specific speed to reach maximum attainable efficiency that may vary depending on the pump design.
There can be dire consequences if shaft design is not considered in the system
Nick Vastine of Applied Flow Technology explains effect of oversizing and undersizing pumps
In part 2 of this 2-part series, Jim Elsey instructs operators to do no harm.
Submersible Solutions explores learning tips on remote monitoring and social distancing while navigating novel coronavirus issues.
Suppliers' deliveries to manufacturers was slower in May due to plant shutdowns, transportation challenges and importing difficulties.
Science can help with formal predictions, but uncertainties can compromise the results.
In part 1 of this 2 part series, Jim Elsey instructs operators to do no harm.
These motors can eliminate problems with heat generation in peristaltic pumps used in bioreactor systems.
Gross domestic product in the U.S. declines at an annualized rate of 4.8 percent in the first quarter of the year.
The fourth part of William Livoti's series on RCFA.
These are manually set and do not react to pump and system changes.
Rowe explains how his company has dealt with the coronavirus fallout.
Reexamining how this concept can help you ensure a more reliable system
Columnist Lev Nelik responds to a reader question about suction specific speed.